The Texas Instruments TPA3140D2 is an efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers at up to 10W/6ohm or 8ohm (per channel).
Designed for automotive inductive load-switching applications, such as window, door latch and antenna relays, solenoids and small DC motors, the DMN61D8LVTQ dual-channel inductive-load driver has been introduced by Diodes Incorporated.
Microsemi has announced availability of the PD-9001GI and PD-9501GI Power-over-Ethernet (PoE) midspan injectors, expanding its proven PoE offering into new industrial and outdoor applications. The PD-9001GI and PD-9501GI industrial PoE midspans are aimed at applications such as physical security, WLAN infrastructure, cellular infrastructure and industrial automation.
Four new products have been introduced by Toshiba Electronics Europe expanding its TL1L4 series of white LEDs. The new additions provide a high luminous flux and are suited to applications ranging from street and stadium lighting to LED light bulbs and down lighting for use in the home.
Latest from Harwin is news of the expansion of its popular 1.27mm pitch Archer M50 portfolio with new IDC connectors.
Mean Well’s HEP-100/150/185 harsh-environment power supply, the low-noise high-grade AC/DC power supply series is designed to operate in extreme conditions and temperatures. The HEP-100/150/185 units provide rated power of 100W, 150W, or 185W respectively.
The new Kemet organic capacitor (KO-CAP), the sold electrolytic capacitor with a conductive polymer cathode combines the low ESR of multilayer ceramic, the high capacitance of aluminium electrolytic and the volumetric efficiency of tantalum into a single surface-mount package.
The addition of the UTC2000, USB-C controller to its leading portfolio of USB devices has been announced by Microchip. With the new device, designers of a wide range of applications covering the consumer, industrial and automotive markets can now simply and quickly implement the radically updated USB-C connector cost effectively, speeding time to market and minimising bills of materials.
Addressing the critical need for security in the Internet of Things (IoT), Texas Instruments (TI) has announced the TM4C Crypto Connected LaunchPad development kit to speed design of IoT gateways and nodes, factory control and automation systems, grid infrastructure, alternative energy and industrial applications.
Murata’s NMUSB202MC surface-mount DC-DC converter module provides dual port USB data isolation from a single upstream port with full power (500mA) available from each downstream port.
Power Integrations announced its newest member of the ChiPhy charger-interface IC family CHY103D, the first IC for off-line AC-DC chargers compatible with the Quick Charge (QC) 3.0 protocol from Qualcomm Technologies, Inc., a subsidiary of Qualcomm Inc.
Panasonic Automotive & Industrial Systems is to launch a new range of current-sensing resistors featuring ultra-low ohmic values (as low as 0.5milliohms) and TCR values as low as 75ppm.
ON Semiconductor’s NCP1x high-voltage switchers are integrating a fixed frequency current mode controller with a 700V MOSFET.
The new AP3402, AP3419 and AP3429 DC-DC step-down converters from Diodes Incorporated operate from inputs of 2.7V to 5.5V to supply loads up to 2A, with great efficiency under both light and heavy load conditions.
Linear Technology has announced the LT8330, a current-mode, 2MHz step-up DC-DC converter with an internal 1A, 60V switch. It operates from an input voltage range of 3V to 40V, making it suitable for applications with input sources ranging from a single-cell Li-Ion to automotive inputs.
The MachXO3L is Lattice’s newest instant-on, non-volatile, small footprint FPGA that uses advanced packaging technology to enable the lowest cost devices.
The Texas Instruments (TI) TPS53647 is a high-current, multi-phase, step-down controller offering built-in non-volatile memory (NVM) and PMBus interface. It is fully compatible with the NexFET power stage (CSD95372BQ5MC).
RECOM’s RELV4-16 DALI bus power supply is designed to power a DALI digital lighting control bus. The low-cost AC/DC power supply is fully compliant with the IEC62386 DALI standard and can be used with any DALI-certified product or controller.
