Rohm has developed a new class of power receiver controller ICs compatible with the latest USB Power Delivery (Rev2.0) and Type-C (Rev1.1) standards. The BM92TxxMWV series supports not only conventional USB power supply up to 7.5W, but the newly expanded power range as well up to 100W (20V/5A) for USB Type-C connected devices.
Silicon Labs’ Si8920 galvanically isolated analog amplifiers feature a low-voltage differential input making them ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.
Maxim MAX11253 16-bit delta-sigma analog-to-digital converter (ADC). The 6-channel, 16-bit device achieves exceptional performance while consuming very little power making it ideal for applications.
Analog Devices AD7911 (10-bit) and AD79211 (12-bit) are high-speed low-power, 2-channel successive-approximation analog-to-digital converters (ADCs).
Featuring over 4 million micromirrors, the high-resolution 0.9 WQXGA digital micromirror device (DMD) from Texas Instruments (TI) is a spatial light modulator (SLM) that modulates the amplitude, direction, and/or phase of incoming light.
Microchip has announced a new series within its high-performance PIC32MZ family of 32-bit microcontrollers (MCUs) that features an integrated hardware floating point unit (FPU) for high-performance and lower latency in intensive single and double-precision maths applications.
The new Molex Mini50 Unsealed Connector System is designed to meet the demand for smaller interconnects from vehicle manufacturers, the Molex Mini50 has smaller terminals to fit more signals into vehicle interiors and delivers 50% space savings over traditional USCAR 0.64mm connectors.
The new STM32L4 series 32-bit microcontrollers from STMicroelectronics (ST). The ultra low-power STM32L4 MCUs are based on the high-performance ARM Cortex-M4 32-bit RISC core operating at a frequency of up to 80MHz.
Murata’s MAGICSTRAP is a robust miniature RFID tag module that can withstand the injection moulding process and is embeddable into a PCB, protecting it for use over a long lifecycle.
Silicon Labs Si8920 galvanically-isolated amplifiers. The device’s low-voltage differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.
Designed to modulates the amplitude, direction, and/or phase of incoming light, Texas Instruments’ (TI) DLP6500FYE is a high-resolution 0.65 1080p digital micromirror device (DMD) spatial light modulator (SLM) featuring over 2 million micromirrors.
ON Semiconductor’s NGTB 25-75A insulated gate bipolar transistors (IGBTs) features a robust and cost-effective Trench construction.
Power Integrations has unveiled the InnoSwitch-EP family of off-line CV/CC fly-back switching ICs.
Panasonic’s Grid-EYE infrared array sensor uses an I²C communication interface, enabling temperature measurements at frequencies of 1 or 10 frames/sec.
Diodes Incorporated’s AZV5001 is a low-power, cost-effective headset detection IC with a comparator with internal hysteresis, OR gate, and N−channel MOSFET integrated designed to detect the assertion of a headset with a microphone.
Microchip Technology’s MCP9600 thermocouple EMF to temperature converter converts thermocouple EMF to degree Celsius with integrated cold-junction compensation.
The Texas Instruments (TI) DLP LightCrafter Display 4710 EVM is an easy-to-use, plug-and-play evaluation platform for the Full HD DLP4710 chipset.
The Lattice Semiconductor MachXO3 Starter Kit is a complete development platform for the MachXO3 FPGA
