1.5A Dual input USB/AC Adapter charger and smart Power selector | Heisener Electronics
Fale conosco
SalesDept@heisener.com +86-755-83210559-827
Language Translation

* Please refer to the English Version as our Official Version.

1.5A Dual input USB/AC Adapter charger and smart Power selector

Technology Cover
Data de postagem: 2023-03-20, Maxim Integrated

The MAX8677C is an integrated 1 unit Li+ charger and smart Power selector with dual power inputs (DC and USB). Available in 4mm x 4mm, 24-pin TQFN-EP package. It can use separate input power supplies from USB and AC adapters, or accept both from a single input power supply.


Pin Configuration


                                          

The MAX8677C features a smart power selector to take full advantage of limited USB or adapter power. The battery charging current and input current limit are set to 1.5A and 2A respectively. The unused input power of the system charges the battery. The USB input current can be set to 100mA or 500mA. Automatic input selector switch system load from battery to external power supply.


Typical Operating Circuit


                                  

Additional features include overvoltage protection (OVP), charge status and fault output, power ok monitor, charge timer and battery thermistor monitor. In addition, the heat limit on the chip reduces the battery charge rate to prevent overheating. And all power switches used to charge and switch loads between the battery and the external power supply are included on the chip. No external MOSFETs are required.


Block Diagram

                    

Applications

● Pdas, PDAs and wireless handheld devices

● Smart phone

● Portable media /MP3 player

● GPS navigation

● Digital camera

Produtos relacionados